Basic Guide For Using A Noise Dosimeter

  • January 30, 2021

Working in enterprises that are much of the time presented to significant degrees of commotion contamination will expect you to utilize the utilization of a clamor dosimeter. This gadget is intended to gauge the degrees of clamor that your workers are presented to during their work day, assisting with safeguarding their hearing. On the off chance that you have never utilized a commotion dosimeter, these fundamental guidelines might have the option to take care of you: Visit :- แกดเจ็ตน่าสนใจ

To turn your clamor dosimeter on press the green catch that has the POWER image engraved on it (a line through the focal point of a circle). In the event that the meter doesn’t turn on, watch that the batteries have been appropriately introduced and that they have charge. To kill the commotion dosimeter, just press and hold the green POWER button. The showcase screen will check down from 3dB to 0dB and afterward switch the whole gadget off. 

Prior to working your dosimeter, you should program it to the important settings, either physically or utilizing the product that accompanies the gadget. Select the FAST or SLOW setting dependent on the reason for your meter use – the FAST setting is for the most part utilized for catching brisk explosions of sound, for example, firecrackers and guns, while the SLOW setting is utilized for constant or foundation commotion. You will likewise have to choose the measure level (Lc), the conversion standard (ER) and the limit level (Lt). 

You should utilize your dosimeter to quantify the level of sound that you are being presented to – select the MODE button, at that point select %DOSE to guarantee this is the means by which the sound will be estimated. You will likewise have to choose an occasion bank in which to record that move’s readings – press the EVENT button and select and void bank, from E1 to E5. 

To start estimating, you should press the RUN button. You will realize that this has happened, as the clock show thing will turn on. This shows that the clamor dosimeter is recording the estimations. In the event that you need to stop the meeting in any capacity whatsoever, (for example, a lunch or washroom break), essentially press the RUN button. To continue the meeting, press the RUN button once more. To end the meeting and get a last perusing of clamor openness, press and hold the RUN button for three seconds. 

It is imperative to remember that, toward the day’s end, these are just fundamental directions on the best way to utilize a commotion dosimeter. To completely comprehend the extent of the gadget, just as the extra highlights, you should completely peruse the client’s manual going with your dosimeter.


E-mail :

Submit A Comment

Must be fill required * marked fields.